Find

Vaillant Group UK’s Online Training Courses

Unfortunately due to the developing COVID-19 situation we have taken the decision to suspend all training operations from our Centres of Excellence. If you have tried to get onto one of our other training pages, you will have been redirected to this page.

The following online training courses are offered by Vaillant Group UK and are available via the Zoom communication platform. The necessary links will be sent once bookings are confirmed.

Candidates get the chance to watch the live webinars and ask questions making the experience as close to the classroom as possible.

To register your interest in any of the training courses, you can fill out this form here.

Boiler courses

CourseDescriptionDurationTarget Audience
Vaillant ecoTEC Product OverviewThis module provides an overview of Vaillant’s range of ecoTEC boilers, their key features and benefits, and specification. The session will also explain how the boilers should be commissioned & set up for optimal use2 hoursExisting heating installers, students and apprentices. Specifiers and system designers
Overview of Vaillant’s Commercial BoilersAn overview of Vaillant’s range of ecoTEC and ecoCRAFT commercial boilers will be provided during this session. We will look at key features & benefits, product specification and how the boilers should be commissioned & set up for optimal use1 hour 30 minutesExisting domestic & commercial heating installers, students and apprentices. Specifiers and system designers
ecoFIT pure Product OverviewSession focuses on Vaillant’s range of ecoFIT pure boilers looking at key features & benefits, and product specification. The session will also explain how the boilers should be commissioned & set up for optimal use1 hour 30 minutesExisting heating installers, students and apprentices. Specifiers and system designers
ecoTEC Sustain Combi Boiler introductionIntroduction to the ecoTEC Sustain specification combi boiler. The session will highlight the features and benefits of this specialist product including main technical features and benefits, installation, commissioning and maintenance. As well as the range of controls that can be fitted with this product.1 hour 30 minutesExisting heating installers, students and apprentices. Specifiers and system designers
Commissioning a Vaillant gas applianceOverview of specific commissioning and set up / optimisation requirements for various Vaillant boiler focusing mainly on D / P codes but also including range rating, FGA, degassing product / system1 hour 30 minutesExisting heating installers, students and apprentices. Specifiers and system designers

Industry courses

CourseDescriptionDurationTarget Audience
Heating's Dirty Little SecretThis module provides an overview of commercial heating and how system separation using plate heat exchangers can prolong system life and efficiency. (Validated by CIBSE as a CPD session – certificates can be issued if required)1 hour 30 minutesExisting domestic & commercial heating installers, students and apprentices. Specifiers, system designers, consultant engineers
Hydrogen & the Role of Green Gas in Decarbonising HeatThis session provides an introduction to hydrogen and the role that green gases will play in decarbonising heat in buildings. (Validated by CIBSE as a CPD session – certificates can be issued if required)1 hour 30 minutesInstallers, students, apprentices, system designer, specifiers, low carbon installer, consultant engineers
Water QualityModule considers the importance of good water quality and provides an introduction to best practice techniques including recent changes to BS75931 hour 30 minutesInstallers, students, apprentices, system designer, specifiers, low carbon installer, consultant engineers
Electrical Safe Isolation Part 1This is a part one of a vocational qualification in conjunction with CERT-ain Certification Services. This module will provide the theory to support the Safe Isolation qualification. To complete the course, it will be necessary to pay a certification fee and a undertake a formal assessment in one of our Centre’s of Excellence once they re-open1 hour 30 minutesInstallers, students, apprentices, system designer, specifiers, low carbon installer, consultant engineers
Unvented hot water storage cylindersThis module provides an overview of Vaillant's range of unvented hot water storage cylinders and considers key requirements of Building Regulations G31 hour 30 minutesInstallers, students, apprentices, system designer, specifiers, low carbon installer, consultant engineers

Controls courses

CourseDescriptionDurationTarget Audience
Vaillant Controls OverviewThis session provides an overview and introduction to the current range of Vaillant controls1 hour 30 minutesInstallers, students, apprentices, system designers, specifiers
Introduction to Vaillant’s New senso Range of Controls An introduction to Vaillant new range of senso heating controls1 hour 30 minutesInstallers, students, apprentices, system designers, specifiers
A Guide to Weather and Load CompensationSession aims to de-mystify load and weather compensation in heating controls and its relevance to heating system1 hour 30 minutesInstallers, students, apprentices, system designers, specifiers

Renewable Technology courses

CourseDescriptionDurationTarget Audience
Decarbonisation of Heat & Low Carbon TechnologiesThis session is aimed at providing an overview of the challenges of decarbonising heat in buildings, an introduction to low carbon technologies and their role in decarbonising heat. (Validated by CIBSE as a CPD session – certificates can be issued if required)1 hour 30 minutesIndividuals new to heat pump technology (would benefit non-technical back office and support staff)
Introduction to Heat PumpsAimed at existing heating installers or apprentices, this module will provide an introduction to the types of heat pump available and their operating principles1 hour 30 minutesExisting heating installers with little or no heat pump experience, students, apprentices, system designers, specifiers (would also benefit non-technical back office and support staff)
An Overview of Vaillant’s Heat Pump RangeThis module introduces the full range of heat pumps offered by Vaillant looking at key features & benefits, and product specification of each product family1 hour 30 minutesInstallers, students, apprentices, system designers, specifiers
aroTHERM plus Air Water Heat Pump Installation & Commissioning Part 1 Module provides an introduction to Vaillant’s new aroTHERM plus air source heat pump and considers key features and benefits, specification and system design requirements1 hour 30 minutesInstallers, students, apprentices, system designers, specifiers
aroTHERM plus Air Water Heat Pump Installation & Commissioning Part 2Module is a follow on from Part 1 and looks at the detail of installing and commissioning the new aroTHERM plus air source heat pump2 hoursInstallers, students, apprentices, system designers, specifiers (who have completed Part 1)
An Introduction to Vaillant’s aroTHERM split Air Source Heat PumpThis module provides an overview of Vaillant’s aroTHERM split refrigerant split air source heat pump, its key features and benefits, specification outline and will also explain key installation and commissioning requirements2 hoursInstallers, students, apprentices, system designers, specifiers
flexoTHERM Product IntroductionThis module aims to provide an overview of Vaillant’s flexoTHERM heat pumps and considers key features & benefits, specification, installation & commissioning. It also covers the different energy source technologies that the flexoTHERM can be used with.1 hour 30 minutesInstallers, students, apprentices, system designers, specifiers
geoTHERM GSHP product overviewSession provides an overview of Vaillant’s geoTHERM ground source heat pumps and considers key drivers of renewable energy and all the main features & benefits, specification, installation & commissioning of the geoTHERM product portfolio1 hour 30 minutesInstallers, students, apprentices, system designers, specifiers
geoTHERM miniThis module provides an overview of Vaillant’s geoTHERM mini wall mounted ground source heat pump, its key features and benefits, specification and will also explain key installation and commissioning requirements1 hour 30 minutesInstallers, students, apprentices, system designers, specifiers
Natural Refrigerants and their Use in Heat PumpsAn in-depth, detailed technical look at the history and use of various refrigerants and how natural refrigerants are shaping the future for heat pumps1 hour 30 minutesHeat pump specialists, system designers, consultant engineers