Find

How to thaw a frozen condensate pipe

If your Vaillant boiler is flashing with either a F28 or an F29 code or you fear your condensate pipe is frozen, you can follow these simple steps.

During winter months and extended periods of low temperatures, it's possible that your condensate pipe may freeze, especially if the pipe exits outside of your property.

The condensate pipe is usually a white overflow pipe, similar to one you may find on a washing machine or sink waste pipe. It allows your boiler to dispose of condensation to an outside drain via this pipe. If the liquid from the expelled condensation freezes over, it can cause blockages and build-up of pressure. Not only can this reduce the performance of your central heating system, but you can damage your boiler as a result of the blockage. The pipe will usually be located on the external wall outside from where your boiler is. We’ve included some steps you can take at your home to help solve this issue.

How to defrost your frozen condensate pipe

1. Check that your condensate pipe has actually frozen

For users who have a Vaillant boiler, specific error codes will indicate a blocked pipe. Look for fault codes (F28 or F29) on the boiler’s display screen to identify this. If you have a third-party boiler, different codes may be used, or you may hear a bubbling and gurgling sound coming from your boiler whilst in use. This could be a sign that your condensate pipe has frozen, which will require immediate attention to ensure continued performance.

Note that pipes are more likely to freeze if your boiler and heating system have not been in consistent use during a period of freezing temperatures. This often happens when you leave your home for holiday and do not use your boiler, so we advise to keep your boiler active on a schedule timer to avoid pipes freezing.

2. Locate the frozen blockage within the condensate pipe

The condensate drainage pipe is a plastic pipe, typically grey or white, connected to the bottom of your boiler. It runs through the wall and outside the property for part of its length. Usually your condensate pipe will be frozen on the most exposed external point, which will typically be at the end of the pipe, just below the drain or around the bend where the insulation is at its thinnest. If possible, check the end of the pipe for any signs of frost to confirm it is frozen internally.

3. Thaw your condensate pipe to remove the blockage

To effectively defrost a condensate pipe, you can simply pour warm water along the affected area of the pipe to dislodge, melt and remove the ice blockage. Use a suitable container - like a watering can or pitcher - and continue the process until either the ice falls from the pipe or until the contents of the pipe are fully drained. It is important not to use boiling water from a kettle as this can damage or crack the pipe, causing damage that will be costly to repair and render your boiler non-functioning for the duration.

Alternatively, you can use a hot water bottle placed against the pipe to assist with the process, and you can wrap a blanket around the external pipe to help insulate and prevent the issue from occurring throughout the winter months.

4. Restart your boiler once ice blockage has been removed

You should always check your boiler manual for instructions on how to reset your boiler correctly before undertaking this operation, then you should restart your boiler.

You can avoid having to repeat this process in future by insulating your condensate pipe. By insulating your condensate pipe you are reducing the risk of it freezing and blocking again in future. All good DIY stores should sell pipe insulation, this can easily be fitted with little effort.