Trustpilot
Find
For support call: 0330 100 3143
Return to homeowner

Introducing...

Industry leading training for industry leading engineers

At Vaillant, we pride ourselves on being at the forefront of technology and sharing our expertise, offering a wide range of training courses to help support our installers and their businesses, whether you are looking for online, practical, or accredited courses, we can help find the right courses and blended training journeys for you.

Vaillant Training Courses

Accredited Courses

Browse our range of

accredited

vocational

courses

Boiler Courses

Browse our wide range of boiler courses

Controls Courses

Browse our wide range of controls courses

Industry Courses

Browse our wide range of certified industry courses

Renewable Technology courses

Browse our range of

renewable

technology

courses

Vaillant Training Courses

Accredited Courses

Browse our range of

accredited

vocational

courses

Boiler Courses

Browse our wide range of boiler courses

Controls Courses

Browse our wide range of controls courses

Industry Courses

Browse our wide range of certified industry courses

Renewable Technology courses

Browse our range of

renewable

technology

courses

CourseDescriptionDuration
Water Regulations/Water Bylaws (Scotland)This course covers the Water Regulations (1999), ideal for installers wishing to gain knowledge before applying to join their local water authorities Water Industry Approved Plumber Scheme. This course is accredited by Cert-ainPart 1 - Online 2 Hrs
Part 2 - In-centre 2 Hrs
Unvented Hot Water SystemsThis course covers vented and unvented hot water systems including water supply, backflow prevention, discharge arrangements and safety controls required to comply with Building Regulations Approved Document G (3). This course is accredited by Cert-ainPart 1 - Online 2 Hrs
Part 2 - In-centre 4 Hrs
Energy EfficiencyFor central heating installers working in domestic properties who wish to self-certificate their work as required by Part L of the Building Regulations. This course is accredited by Cert-ainPart 1 - Online 2 Hrs
Part 2 - In-centre 2Hrs
Electricity Safe IsolationThis course is for plumbers, gas engineers and heating installers who need to carry out safe electrical isolation and re-establishment procedures as part of their work. This course is accredited by Cert-ainPart 1 - Online 2 Hrs
Part 2 - In-centre 4 Hrs
Air Source Heat Pump (OFTEC)This course has been developed by OFTEC, in conjunction with industry experts including Vaillant, for technicians who wish to install, commission and service Air Source Heat Pumps (not including the refrigerant system).The course covers a variety of areas including health and safety, regional legislation and requirements, safe electrical isolation, factors to be considered before and during installation, filling and flushing requirements, appliance installation, soundness tests, operational checks and procedures, fault finding identifying unsafe situations, and practical servicing and commissioning.

Assessment is via multiple choice theory papers, practically assessed worksheets (PAWS), and practical hands-on assessment.

Pre-requisites
  • Applicants must hold a nationally recognised qualification and/or have been registered with a competent person scheme, in a trade associated with heating and/or plumbing work, for a period of not less than two years
Or
  • Must have ‘on the job’ heating installation and/or maintenance experience covering a period of not less than two years.
  • They must also hold the following qualifications:
    • current and valid Water Regulations certificate 
    • current and valid Unvented Hot Water certificate
3 Days

You can sign in to Vaillant Academy training courses through your Vaillant Advance account.

Sign In Sign UpNo Account? Register Your Interest

Boiler Courses

Course Description Duration
Vaillant ecoTEC Plus and Pro Product OverviewThis module provides an overview of the ecoTEC range of boilers: their key features, benefits and specification. It will also give an overview of the commissioning and set-up of these units for optimal use.75 minutes
Vaillant ecoTEC exclusive The course will cover pre-installation system checks, product specification, control options and system accessories, commissioning, system setup and maintenance of the ecoTEC exclusive range.60 minutes
Commercial Boiler System SeparationThis module provides an overview of commercial heating and how system separation by using plate heat exchangers can prolong system life and efficiency.60 minutes
High Output Domestic and Commercial BoilersThe course covers an overview of the >50kW boilers, ecoTEC and ecoCRAFT Commercial boilers, including key features, benefits and product specification. It will also give an overview of the commissioning and set-up for optimal use.90 minutes
ecoFIT Installation and CommissioningThis module provides an overview of the ecoFIT range of boilers: their key features, benefits and specification. It will also give an overview of the commissioning and set-up for optimal use60 minutes
ecoTEC and ecoFIT Install, Set-up and ServiceThis course covers the ecoTEC Plus and Pro as well as the ecoFIT domestic gas wall hung boilers. The course will major on the installation, commissioning, and maintenance for these ranges of products, including the use of diagnostics for commissioning and maintenance.
This course follows on from our on-demand E-Learning training packages available in the Vaillant Academy. Attendees will gain more “must-have” knowledge on updated regulations as well as tips on how to be more affective and confident when installing and commissioning one of these appliances.
Full day in-centre
ecoTEC and ecoFIT Diagnostics and Fault Finding
The ecoTEC & ecoFIT diagnostic and fault-finding training course will cover the system set-up and water quality checks in the first instance, plus the use of the diagnostics and status codes to check for system issues before any removal of components.
The method of operation will be covered in both heating and domestic hot water. Persistent faults using scenarios will help the identification areas of special checks. Also included is the safe isolation and multimeter use, during dead and live testing, strip-out and re-build of internal components and re-commissioning after repair.
Full day in-centre
ecoTEC exclusive Install, Set-up and ServiceThe course will cover pre-installation system checks, product specification, control options and system accessories for the ecoTEC exclusive range. It will also give an overview of the commissioning, set-up and maintenance for optimal use of this boiler.Full day in-centre
Commercial ecoTEC Insp & MaintenanceThis practical training course is a follow on from the installation and commissioning course. It is aimed at qualified commercial gas engineers who have attended at least one other Vaillant Commercial training course.
The course will go through correct maintenance procedures and techniques on the Vaillant ecoTEC gas appliances including 48kW, 64kW, as well as the 80kW, 100kW and 120kW boilers including basic diagnostics used for fault diagnosis.
Full day in-centre

You can sign in to Vaillant Academy training courses through your Vaillant Advance account.

Sign In Sign UpNo Account? Register Your Interest

CourseDescriptionDuration
Part 1 - Systems & LogicThis course is the first course in our selection of controls courses and should be attended before any further controls courses and/or any in centre course
This course is designed to give attendees the underpinning knowledge and theory of efficient control of appliances and heating systems whilst also covering VA/GW control system logic and terminology
No products covered in this module
2 hours
Part 2 - Controls OverviewThis course provides information about the Vaillant controls product range, and is ideally suited to installers and engineers either new to Vaillant or its controls, and engineers already installing Vaillant products who wish to learn more about the range of controls available.
Suitable for both domestic and commercial boilers and also renewables
This course is also a pre-requisite for anyone wishing to progress further with our controls courses with an aim to visit one of our Centres of Excellence for a practical course
No installation, wiring, or setup specifics covered – product range familiarity only (range, model names/numbers, F&B’s, system compatibility etc)
2 hours
Part 3 - WiringThis course provides information about the installation and wiring of our controls (setup covered in another course)
Aimed towards boilers as renewables is covered in separate course/s
To cover basic combi control wiring (eBUS and 3rd party)
To cover basic system wiring (S and Y plans and S plan plus)
2 Hours
Part 4 - Setup & UseThis course provides information and knowledge for the setup of our controls and what settings and parameters are available on them
To cover key specific settings and setup of our controls
Not everything will be covered as some things will be covered on a practical course in one of our Centres of Excellence
2 Hours
Part 5 - Installation and SetupThis course brings together all of our on-line training into one practical training day in one of our Centres of Excellence. You will be able to practice everything you have learnt during the on-line sessions.
The course will cover how to specify the correct type of control, the installation including physical wiring, powering up and commissioning of the system to specific requirements.

It is highly recommended that installers attend the online controls courses prior to this incentre course for essential foundation information and knowledge.
Full day in-centre

You can sign in to Vaillant Academy training courses through your Vaillant Advance account.

Sign In Sign UpNo Account? Register Your Interest

Industry Courses

CourseDescriptionDuration
Hydrogen and the Role of Green Gas This course covers an introduction to hydrogen and the role that green gases will play in decarbonising heat in buildings.60 minutes
Vaillant Unvented Hot Water CylindersThis course will cover an overview of Vaillant's range of unvented hot water storage cylinders and considers key requirements of Building Regulations G3. 90 minutes

You can sign in to Vaillant Academy training courses through your Vaillant Advance account.

Sign In Sign UpNo Account? Register Your Interest

Renewable Technology Courses

CourseDescriptionDuration
Decarbonisation of Heat This module will cover an introduction to low carbon technologies and their role in decarbonising heat.90 minutes
Introduction to Heat Pumps This module will cover an introduction to the types of heat pumps available and their operating principles.90 minutes
Vaillant Heat Pump Overview This course covers Vaillant's extensive range of heat pumps systems and products: their key features, benefits and specification. Attendees will gain more "must have" knowledge before training on specific product types.90 minutes
aroTHERM plus Part 1: Introduction This module will cover an introduction to Vaillant’s new aroTHERM plus air source heat pump: their key features, benefits, specifications and includes system design requirements.60 minutes
aroTHERM plus Part 2: Installation and Commissioning This module follows on directly from Part 1 and provides detailed instructions when installing and commissioning the aroTHERM plus air source heat pump.90 minutes
aroTHERM Plus Part 3: Soundsafe Zone aroTHERM Plus Soundsafe is mandatory for all installation or maintenance engineers who are installing the aroTHERM Plus heat pump with the accessory "Coded resistor" or carrying out routine Maintenance on the outdoor unit. This Safety Training is essential as both fitting of the coded resistor for the cooling function and routine maintenance require access to the Soundsafe area of the outdoor unit. This On-line session will give installers and maintenance engineers the required additional Safety information for them to be considered as "Level 2" Competent to undertake gaining access to the Soundsafe area of the aroTHERM Plus heat pump.

This on-line course will be followed up by an assessment when you attend face to face training in one of our Centres of Excellence on either the aroTHERM Plus Installation and Commissioning or aroTHERM Plus Maintenance courses.

Please print out and complete the questions in the Workbook provided at the end of the on-line training course as this will be required when attending the face to face session.
90 minutes
aroTHERM Plus Part 4: Cooling This course is designed as an add on session to cover the cooling details of the aroTHERM Plus air source heat pump when being set-up for cooling as well as heating. The course will cover the main features and benefits of the cooling capabilities of the aroTHERM Plus as well as the limitations of the unit, we will go through the installation of the cooling coded resistor, and setting the system to run with cooling in manual or automatic mode.90 minutes
aroTHERM Plus Install, Commissioning, Set UpThis course will cover the installation and commissioning using the schematic drawing.
  • Identification of main components and accessories.
  • The order of the installation process including wiring to the outdoor and indoor unit and various accessories (mixing units, smart wiring centre, system controls.)
  • The fill and flush process including air separator in glycol circuit.
  • The first time powering up, including commissioning using the switch on sequence and set up of wizards.

Our Trainer recommends you complete Vaillant aroTHERM Plus Part 1 Introduction and Vaillant aroTHERM Plus Part 2 Installation and Commissioning lessons, before attending the aroTHERM Plus Install Commission Set-Up Course Terminology and different components are covered in the on-demand lessons in details.

Upon arrival, you will have a short pre-assessment where you will demonstrate the Soundsafe safety aspect of working safely with R290 filled equipment, therefore, you are required to complete Vaillant's aroTHERM Plus Soundsafe Zone lesson, before attending this course.

After you have completed the aroTHERM Plus Soundsafe Zone lesson, you will be able to download the workbook, please bring this workbook with you to this course.
Full day in-centre
aroTHERM plus Maintenance This course will cover the process of safely maintaining the aroTHERM Plus system components, including the outdoor units, indoor units, additional requirements for DHW components, system and diagnostic checks that need to be carried out at specific intervals.

Upon arrival, you will have a short pre-assessment where you will demonstrate the Soundsafe safety aspect of working safely with R290 filled equipment, therefore, you are required to complete Vaillant's aroTHERM Plus Soundsafe Zone lesson, before attending this Maintenance course.

After you have completed the aroTHERM Plus Soundsafe Zone lesson, you will be able to download the workbook, please bring this workbook with you to this course.
Full day in-centre
aroTHERM Plus Basic Fault FindingThis course follows on from our in centre aroTHERM Plus Heat Pump Courses. The course will cover method of operation including the running criteria of the heat pump, demonstrated which observing the system setup and diagnostic checks. This will include component testing and checking using the heat pump AI (appliance interface) and the SensoCOMFORT control to check system components for correct operation.Full day in-centre
   

You can sign in to Vaillant Academy training courses through your Vaillant Advance account.

Sign In Sign UpNo Account? Register Your Interest

Why Train with Vaillant

Lessons

24/7 access to our pre-recorded training sessions for more convenience.

Webinars

Trainer-led live online sessions integrate training into your working day.

Learning Paths

Guidance through your training journey to keep your training on track

Incentives

Earn Advance credits for completing our online or in-centre courses

Trainer-led

Trainer led content allows you to access more support outside of our centres of excellence.

Certificates

Earn certificates by completing courses through your Advance account.

Aspire

We have launched Vaillant Aspire, our new heat pump training programme available to installers

We have launched Vaillant Aspire, our new heat pump training programme available to installers. Each Aspire learning journey will be personalised depending on the installer’s existing qualifications, starting with theory-based modules covering a variety of subjects from heat loss and system design, to commissioning the heat pump and setting up the controls for optimised performance.

The types of training we offer...

Vaillant Academy

On-Demand Courses

Practical Courses

Accredited Courses

Vaillant Academy

The Vaillant Academy offers you a convenient online platform with a large selection of training options to help support you and your business, giving you even more opportunities to expand your technical know-how no matter the time of place. 

Here at Vaillant we proudly support our installers to help their businesses grow and develop.

You can sign in to Vaillant Academy training courses through your Vaillant Advance account.

Don't have a Vaillant Advance Account? Sign up here

On-Demand Courses

Our on-demand training courses are available through the Vaillant Academy, and allow candidates to watch live webinars and attend lessons, making the experience as close to the classroom as possible.

Courses that we have available online include:

  • Boiler courses
  • Controls courses
  • Renewable Technology courses
  • Industry courses

You can sign in to Vaillant Academy training courses through your Vaillant Advance account.

Practical Courses

Our hands-on training courses are hosted nationwide through our Centres of Excellence, allowing you to get first hand experience of Vaillant's heating systems and solutions alongside our dedicated training team.

Courses that we have available in-centre include:

  • Boiler courses
  • Controls courses
  • Renewable Technology courses

Watch our Installer Interview video to discover more about practical training

Accredited Courses

Our Accredited courses are comprised of 2 parts; Part 1 is a live trainer-led webinar hosted via Zoom, whilst Part 2 takes place in person at one of our Centres of Excellence.

Accredited courses that we currently offer are all accredited by Cert-ain and include:

  • Water Regulations
  • Unvented Hot Water Systems
  • Energy Efficiency
  • Electricity Safe Isolation

Watch our video of A Day in the Life of a Training Manager here.

Introducing smartTALKs, our new expert marketing support video series!

Following the success of our Business Clinic series of events and online webinars, we're pleased to launch our new marketing video series, smartTALKs, exclusively for our Advance members as part of our mission to support installers.

smartTALKS are a series of short videos, each fronted by an industry expert sharing their knowledge and expertise in various areas of marketing and branding. From navigating your way around marketing activities such as creating a brand and crafting a good social media presence, to the importance of an easy-to-use website and an effective Customer Relationship Management system.

The whole smartTALKs series is available exclusively via the Vaillant Academy.

You can sign in to Vaillant Academy training courses through your Vaillant Advance account.

Vaillant Academy FAQs